IJLBPR accepts research and review articles in the fields of Life Sciences, Biotechnology and Pharmaceutical Sciences.
The International Journal of Life Sciences Biotechnology and Pharma Research (IJLBPR) is a Quarterly published online Journal, which publishes innovative research papers, reviews, mini-reviews and short communications dealing with Life Sciences, Biotechnology (Botany, Zoology, Marine Biology, Health and Nutrition, Cell Biology, Neurobiology, Biochemistry, Genetics, Microbiology, Molecular Biology, Immunology, Plant Biotechnology, Animal Biotechnology) and Pharmaceutical Sciences (Pharmaceutical Technology, Pharmaceutics, Biopharmaceutics, Pharmacokinetics, Medicinal Chemistry, Molecular Drug Design, Pharmacognosy and Phytochemistry, Pharmacology, Pharmaceutical Analysis, Pharmacy Practice, Clinical and Hospital Pharmacy, Pharmacogenomics,).
The papers should be original and comprise previously unpublished research. Submission of manuscript implies that the same is not being considered for publication elsewhere.
All manuscripts are subject to rapid peer review and those of high quality (not previously published and not under consideration for publication in another journal) will be published without delay.
Online submission of the manuscript is strongly recommended. Submit manuscript in the “Submit Manuscript” button or link present in the journal webpage. A manuscript number will be mailed to the corresponding author within 1 or 2 days.
Cover Letter and Expert Approval Letter
During submission of the article, a cover letter and expert approval letter should be included having
• Authors full address and telephone/fax number.
• The corresponding author should mention the undertaking that if any animal studies carried was in accordance with their country or institutional ethical committee and also state that the manuscript has not been published elsewhere (except in the form of an abstract or as part of a published lecture or academic thesis).
• Fill the cover letter and expert approval letter, sign it and send along with your manuscript. Without these forms (Cover letter and Expert approval letter) your manuscript will not be considered for publication.
Preparation of Manuscript
The manuscript should be prepared in English using “MS Word” with 1 inch margin on all sides (Top, Bottom, Left and Right side) of the page. “Times New Roman” font should be used. The font size should be of 12pt, but main subheadings may be of 14pt (Verdana). All plant and microorganism's scientific names should be written in italic. All research articles should be typed 1.5 spacing and should have the following sections: Title page, Abstract, Key words, Introduction, Materials and methods, Results and Discussion, Conclusion, Acknowledgement (if any) and References.
The title should appear on a separate page which should then followed by the author name and the institution name and address by indicating suitable superscripts.
• The full title of the paper without abbreviations. The title should be as brief and informative as possible, specifying clearly the content of the article.
• Full names of authors and their affiliations, of all authors indicating the corresponding author in astriek mark (*).
• Corresponding author contact information (address, telephone, e-mail).
o Paper Title: CAPITAL LETTERS. 14 point type, Bold (Verdana)
o Author(s): First Letter Capital, 12 point type, Bold (verdana)
o Affiliation(s):Word case, 10 point type (Times Roman)
Corresponding author has the responsibility to ensure that all co authors are aware and approve the contents of the submitted manuscript.
Should start on a new page after the title page and should be typed in single-space to distinguish it from the Introduction and it should not exceeding 200 words.
Provide 4 to 6 appropriate key words after abstract. These keywords should be typed at the end of the abstract.
It should be a concise statement of the background to the work presented, including relevant earlier work, suitably referenced. It should be started in a separate page after abstract
Materials and Methods
All important materials and equipments, the manufacturer’s name and, if possible, the location should be provided. The main methods used shall be briefly described, citing references. New methods or substantially modified methods may be described in sufficient detail. The statistical method and the level of significance chosen shall be clearly stated.
Results and Discussion
The important results of the work should be clearly stated and illustrated where necessary by tables and figures. Results and discussion may be separate or combined based on the author’s requirement. The statistical treatment of data and significance level of the factors should be stated wherever necessary. The interpreted results should be explained clearly in discussions and should relate them to the existing knowledge in the field as clearly as possible. Tables, Graphs and figures (Illustrations) should be inserted at the end of the manuscript and should have appropriate numbers and titles with an explanatory heading. Color photographs and illustrations (line drawings, halftones, photos, photomicrographs etc) must be clean originals. Those photographs must be clear and sharp. Digital files are recommended for highest quality reproduction and should follow the following guidelines
• 300dpi or higher sized to fit journal page
• JPEG, GIF, TIFF and PDF formats are preferred)
• Acknowledgement (if any)
Concisely summarizes the principal conclusions of the work and highlights the wider implications. This section should not merely duplicate the abstract.
Acknowledgements as well as information regarding funding sources may be provided.
References must be cited in the text mentioning the last name of the author and year between parentheses. In case of single or double author papers refer to authors’ names followed by the year of publication (e.g., Hanson, 1980; Hanson and Langmuir, 1978). For multiple author papers, name of the first author should be followed by “et al.” (e.g., Ashwal et al., 1998). Arrange all the references (cited in the text) at the end of the manuscript under the heading “References” in alphabetical order in the following style.
 S. Chen, B. Mulgrew, and P. M. Grant, "A clustering technique for digital communications channel equalization using radial basis function networks," IEEE Trans. on Neural Networks, vol. 4, pp. 570-578, July 1993.
 J. U. Duncombe, "Infrared navigation—Part I: An assessment of feasibility," IEEE Trans. Electron Devices, vol. ED-11, pp. 34-39, Jan. 1959.
 A. Cichocki and R. Unbehaven, Neural Networks for Optimization and Signal Processing, 1st ed. Chichester, U.K.: Wiley, 1993, ch. 2, pp. 45-47.
 W.-K. Chen, Linear Networks and Systems, Belmont, CA: Wadsworth, 1993, pp. 123-135.
(Book style with paper title and editor)
 R. A. Scholtz, "The Spread Spectrum Concept," in Multiple Access, N. Abramson, Ed. Piscataway, NJ: IEEE Press, 1993, ch. 3, pp. 121-123.
 G. O. Young, "Synthetic structure of industrial plastics," in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15-64.
(Published Conference Proceedings style)
 S. P. Bingulac, "On the compatibility of adaptive controllers," in Proc. 4th Annu. Allerton Conf. Circuits and Systems Theory, New York, 1994, pp. 8-16.
 W. D. Doyle, "Magnetization reversal in films with biaxial anisotropy," in Proc. 1987 INTERMAG Conf., 1987, pp. 2.2-1-2.2-6.
(Thesis or Dissertation style)
 J. Williams, "Narrow-band analyzer," Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA, 1993.
 N. Kawasaki, "Parametric study of thermal and chemical nonequilibrium nozzle flow," M.S. thesis, Dept. Electron. Eng., Osaka Univ., Osaka, Japan, 1993.
 J. P. Wilkinson, "Nonlinear resonant circuit devices," U.S. Patent 3 624 12, July 16, 1990.
 Letter Symbols for Quantities, ANSI Standard Y10.5-1968.
 Transmission Systems for Communications, 3rd ed., Western Electric Co., Winston-Salem, NC, 1985, pp. 44-60.
 Motorola Semiconductor Data Manual, Motorola Semiconductor Products Inc., Phoenix, AZ, 1989.
(Journal Online Sources style)
 R. J. Vidmar. (August 1992). On the use of atmospheric plasmas as electromagnetic reflectors. IEEE Trans. Plasma Sci. [Online]. 21(3). pp. 876-880. Available: http://www.halcyon.com/pub/journals/21ps03-vidmar
Tables should be typed on a separate page and must be numbered with Arabic numerals in the order in which they are cited in the text. They should have a brief descriptive title placed at the top. Footnotes can be included below the table. Table caption should be 12 point Times Roman italic.
Should be on separate pages but not inserted within the text. All figures must be referred to in the text and numbered with Arabic numerals in the sequence in which they are cited. Each figure must be accompanied by a legend explaining in detail the contents of the figure and are to be typed under the figures.
Legends/Captions for figures
Text type should be 12 point Times Roman italic (eg; Figure 1. Caption). A caption should be provided for each figure. The legend should be typed into the manuscript, directly beneath the figure. Legends are to be listed in numerical order, labeled as “Figure 1”, “Figure 2”, etc.
Organization of the review article is at the author’s discretion and must be at a length of 3000 words excluding references and abstract. Abstract and key words are required. Tables, figures, illustrations and references are to be arranged according to research papers.
Submission of the manuscript represent that the manuscript has not been published previously and is not considered for publication elsewhere. Corresponding author would be required to sign a CRA form(Copy Right Assignment) once the manuscript is accepted which would be sent to the corresponding author’s email. The corresponding author can download the form sign it and can be send as an attachment file through email or by post/courier along with the publication charges.
There is no charge for publishing papers in IJLBPR by now. IJLBPR is an Open Access journal and all full texts of published articles are available online free of charge for everyone.
Authors involving in the usage of experimental animals and human subjects in their research article should seek approval from the appropriate Ethical committee in accordance with “Principles of Laboratory Animal Care”. The Method section of the manuscript should include a statement to prove that the investigation was approved and that informed consent was obtained.
Galley proofs would be sent unless indicated otherwise to the corresponding author. It is the responsibility of the corresponding author to ensure that the galley proofs are to be returned without delay with correction (if any). The authors are responsible for the contents appeared in their published manuscripts.
No responsibility is assumed by the publisher for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or ideas contained in the material herein. The respective individual author(s) are responsible for the facts and views expressed in their articles. Authors are solely responsible for their manuscripts and data published in the journals and any mistakes in the published articles. The publisher does not take any such responsibilities. Copying and reproducing any parts of the published articles should be duly acknowledged, otherwise, it will be considered as an offence as per international law.
All manuscripts should be in electronic form and sent to editor email@example.com